Garage
ENES
Car finder

Morris Oxford Bullnose

Specs, engines and history

Published Sources (1) Report an error

By , Automotive Technology & EV Contributor

Morris Oxford Bullnose: William Morris's First Car
Photo: Vauxford / Wikimedia Commons, CC BY-SA 4.0

All specs

Which Bullnose to choose

Our verdict · Felix Hartmann

  • For history: an early 1913–1915 Oxford with the White & Poppe engine and Raworth body.
  • For everyday vintage use: a 1924–1926 14/28 with the 1,802 cc engine, ideally with the optional front brakes.
  • For variety: one of the closed bodies of the 1920s, such as the saloon (from 1924) or the coupé.
  • For MG enthusiasts: a 1925 car, the chassis on which the first MG was built.

Today's models of the brand are in the Morris catalogue, and more early cars in classic cars.

The Morris Oxford "Bullnose" is the first car built by William Morris, the founder of Morris Motors: a small two-seater announced in October 1912 and produced in Oxford from March 1913 until 1926. It got its popular name from its distinctive round-topped radiator, at first called the "bullet nose", and grew from a 1,018 cc light car into a family car with 1.5- and 1.8-litre engines. In fourteen years 154,244 were built, more than half of them in 1924–1926, and its chassis was the basis of the first MG.

In short

  • Announced in The Autocar in October 1912; production from March 1913 to 1926.
  • 1913: 1,018 cc White & Poppe side-valve four with a fiscal rating of 9; from 1919 Hotchkiss-built 1,548 cc and, from 1923, 1,802 cc (14/28) engines.
  • 154,244 cars by the production table in English Wikipedia; the peak was 54,151 in 1925.
  • The 1925 Oxford chassis formed the basis of the first MG, the 14/28 Super Sports.

Specs by version

VersionEngineGearboxProduction years
1.0 White & Poppe (1018 cc) 1.0 l · 4 cyl · Petrol 1,018 cc 3-sp Manual 1913
11.9 hp Hotchkiss (1548 cc) 1.5 l · 4 cyl · Petrol 1,548 cc 3-sp Manual 1919–1926
14/28 (1802 cc) 1.8 l · 4 cyl · Petrol 1,802 cc 3-sp Manual 1923–1926

Verified Manufacturer and type-approval data from our catalog · Sources and methodology

Morris Oxford Bullnose at a glance

Parameter Value
Maker Morris Motors, Oxford, England
Production March 1913 – 1926
Built 154,244
Body styles two-seater, four-seat tourer, coupé, cabriolet, saloon, landaulet, van
Engines 1,018 cc White & Poppe (1913); 1,548 cc and 1,802 cc Hotchkiss-built side-valve fours (1919–1926)
Gearbox three-speed manual
Rear axle worm drive (1913); spiral bevel (from 1919)
Top speed just under 50 mph (1914, The Times)

Development and production history

William R. Morris named the car after Oxford, the city where he grew up. It was announced in The Autocar in October 1912, and production began in March 1913. The first cars had a 1,018 cc four-cylinder side-valve engine from White & Poppe with a Bosch magneto, a three-speed gearbox from the same supplier and a worm-driven rear axle. Bodies were made by Raworth of Oxford.

In April 1915 Morris showed the press a larger, American-engined version, the Continental Cowley, with a 1,495 cc engine about 50% larger than the Oxford's, and longer, wider and better equipped. After the war the roles changed. From August 1919 the Cowley became a cheaper, simpler two-seater.

The 1919 Oxford took on the larger, stronger build of the Cowley, with a 1,548 cc engine built under licence in Coventry by a British branch of Hotchkiss and given a fiscal rating of 11.9. From January 1923 a 1,802 cc engine with a fiscal rating of 13.9 was optional, giving the 14/28, and it became standard in September 1924. Morris bought the Hotchkiss factory in May 1923 and renamed it Morris Engines.

Production grew slowly through the war years and then very fast. Morris built 393 cars in 1913, 1,932 in 1920 and 6,937 in 1922; in 1923 output jumped to 20,024, in 1924 to 32,939 and in 1925 to 54,151.

Year Built Event
1913 393 Production starts in March
1914 907 -
1915 320 Continental Cowley shown in April
1916–1918 697 / 126 / 198 War years
1919 360 Hotchkiss-built 1,548 cc engine; new Oxford
1920 1,932 -
1921 3,077 -
1922 6,937 -
1923 20,024 1,802 cc 14/28 engine optional; Hotchkiss plant bought
1924 32,939 14/28 standard from September; front brakes shown at Olympia
1925 54,151 Peak year; first MG on the Oxford chassis
1926 32,183 Last Bullnose year
Morris motors, the Bullnose Morris assembly line (silent) - Jack Flash vintage motoring (YouTube)

Design and engineering

The first Oxford was a light car: the standard two-seater weighed 558 kg and the de luxe 635 kg. English Wikipedia gives wheelbases of 126 in and 132 in for these 1913 cars in its table, but other figures in the same article differ, so they are not used here. The post-war car was considerably heavier: an open four-seat tourer weighed 851 kg in 1921 and 1,067 kg in 1925.

From 1919 the Oxford used a two-plate cork-lined clutch, a three-speed gearbox with reverse and a three-quarter floating spiral-bevel rear axle. Bodies were now built by Carbodies of Coventry. Front-wheel brakes were shown as a £10 option (1924) at the October 1924 Olympia show.

Morris Oxford de luxe two-seater of 1913
1913 Oxford de luxe. Photo: Adrian Pratt / Wikimedia Commons, CC BY 2.0

Engines and drivetrain

Engine Years Displacement Rating Notes
White & Poppe 1913– 1,018 cc fiscal rating 9 Bosch magneto, worm-drive axle
Hotchkiss 11.9 1919–1926 1,548 cc fiscal rating 11.9 built in Coventry, later Morris Engines
Hotchkiss 14/28 1923–1926 1,802 cc fiscal rating 13.9 optional from January 1923, standard from September 1924

These were fiscal (tax) ratings; brake power was quoted separately. For the 14/28, Morris claimed about 22 kW (30 bhp) at the October 1924 Olympia show, and 25 kW (34 bhp) was reported for the 1925 show car. The Times found that a 1914 car reached just under 50 mph (80 km/h) on level ground, and a 1921 car about 45 mph (72 km/h). Our power converter translates bhp into kW.

Engine of a 1913 Morris Oxford de luxe
White & Poppe engine of a 1913 Oxford de luxe. Photo: Adrian Pratt / Wikimedia Commons, CC BY 2.0

Morris Oxford Bullnose specifications

Parameter 1913 Oxford 1919–1926 Oxford
Engine 1,018 cc I4, side valves 1,548 cc or 1,802 cc I4, side valves
Gearbox 3-speed + reverse 3-speed + reverse, two-plate cork clutch
Rear axle worm drive spiral bevel, three-quarter floating
Weight 558 kg (standard), 635 kg (de luxe) 851–1,067 kg (open four-seater, 1921–1925)
Bodies Raworth, Oxford Carbodies, Coventry
Top speed just under 50 mph (80 km/h) about 45 mph (72 km/h) in 1921

Bodies and the first MG

In 1913 the Oxford was offered as an open two-seater in standard and de luxe versions, as a coupé cabriolet, a limousine, a commercial van and a sporting model. The 1919–1926 range included an open two-seater, an open four-seat tourer, a coupé, a cabriolet (from 1923), a saloon (from 1924), a landaulet, a three-quarter coupé and, from 1926, a saloon landaulet.

The most famous descendant of the Bullnose is a sports car. The 1925 Oxford chassis was the basis of the first MG, the 14/28 Super Sports. The MG story that followed is told in our history of MG cars.

Morris Bullnose Oxford two-seater of 1923
1923 Oxford two-seater. Photo: Graham Robertson / Wikimedia Commons, CC BY 2.0

Variants and derivatives

Variant Years Body / purpose Engine Notes
Oxford (standard) 1913– open two-seater 1,018 cc White & Poppe 558 kg
Oxford de luxe 1913– open two-seater, better trim 1,018 cc White & Poppe 635 kg
Continental Cowley 1915– larger car 1,495 cc American engine shown to the press in April 1915
Cowley (post-war) from August 1919 cheaper two-seater - no-frills version
Oxford 11.9 1919–1926 two- and four-seaters, closed bodies 1,548 cc Carbodies bodies
Oxford 14/28 1923–1926 as above 1,802 cc standard from September 1924
MG 14/28 Super Sports 1925 sports car on the Oxford chassis 1,802 cc the first MG

The split between Oxford and Cowley explains much of the Bullnose story. Before the war the Cowley was the bigger and better-equipped car. After August 1919 Morris reversed the roles and used the Cowley name for the cheaper model, while the Oxford became the larger car with more equipment. The same basic design thus served two price levels. The post-war range also added closed and convertible bodies step by step: a cabriolet from 1923, a saloon from 1924 and a saloon landaulet from 1926.

MG 14/28 of 1925 based on the Morris Oxford
1925 MG 14/28 on the Oxford chassis. Photo: rhino not for sale / Wikimedia Commons, CC BY 2.0

The Bullnose in numbers

The table shows that the Bullnose was above all a car of the mid-1920s. The three years 1924–1926 account for 119,273 cars, or about 77% of the total, and 1925 alone for 35%. Before the war Morris built only 1,620 cars in 1913–1915. At the same time the car became heavier: the open four-seater grew from 851 kg in 1921 to 1,067 kg in 1925, an increase of about 25%. The 1.8-litre engine increased displacement by about 16% over the 1.5-litre unit.

Morris Oxford Bullnose tourer of 1925
1925 Oxford tourer. Photo: Karen Roe from Bury St Edmunds, Suffolk, UK,cropped and altered by uploader Mr.choppers / Wikimedia Commons, CC BY 2.0
Hotchkiss-built engine of a 1923 Morris Oxford
Engine of a 1923 Oxford. Photo: Graham Robertson / Wikimedia Commons, CC BY 2.0

Morris Oxford Bullnose in our rankings

In production longer than 68% of ranked nameplates in the 1CARS catalog (No. 273 of 912).

Morris Oxford Bullnose photos 6

  • MG 14/28 of 1925 based on the Morris Oxford
  • Morris Oxford Bullnose tourer of 1925
  • Morris Oxford de luxe two-seater of 1913
  • Engine of a 1913 Morris Oxford de luxe
  • Morris Bullnose Oxford two-seater of 1923
  • Hotchkiss-built engine of a 1923 Morris Oxford

Show all 6 photos

FAQ

When was the Morris Oxford Bullnose produced?

From March 1913 to 1926, in Oxford; it was announced in October 1912.

How many Morris Oxford Bullnoses were built?

154,244 according to the production table in English Wikipedia; the best year was 1925 with 54,151 cars.

What engine does the Bullnose Morris have?

A 1,018 cc White & Poppe side-valve four in 1913, then Hotchkiss-built 1,548 cc and 1,802 cc side-valve fours from 1919.

Why is it called the Bullnose?

Because of its distinctive round-topped radiator, at first called the "bullet nose".

What is the connection between the Morris Oxford and MG?

The 1925 Oxford chassis was the basis of the first MG, the 14/28 Super Sports.

Data sources

Data checked by an editor against the sources below.

How we collect and check data

Related articles

View all: Related articles

Photo credits