Size comparison · drawn to scale
Toyota C-HR+ vs Leapmotor B10 I: size comparison
- Length C-HR+ 15 mm0.6 in longer
- Width B10 I 15 mm0.6 in wider
- Height B10 I 60 mm2 in taller
- Boot About the same
Car 1 blue, solid outline
Car 2 coral, dashed outline
Change cars
Zoom in to read the measurements - or see the table below.
Scale about 1:22 on a desktop screen · rulers in mminches, grid 500 mm1 ft · in Overlay both cars start at the front bumper Side view: dashed lines mark the axles Front view: width without mirrors Top view: footprint on the road
Dimensions and difference
The C-HR+ is 15 mm0.6 in longer, 15 mm0.6 in narrower and 60 mm2 in lower than the B10 I. Its wheelbase is 15 mm0.6 in longer.
| Dimension | C-HR+ | B10 I | Difference, car 1 vs car 2 |
|---|---|---|---|
| Length | 4,530 mm14 ft 10 in14 ft 10 in4,530 mm | 4,515 mm14 ft 10 in14 ft 10 in4,515 mm | +15 mm+0.6 in +0.3% |
| Width | 1,870 mm6 ft 2 in6 ft 2 in1,870 mm | 1,885 mm6 ft 2 in6 ft 2 in1,885 mm | −15 mm−0.6 in −0.8% |
| Height | 1,595 mm5 ft 3 in5 ft 3 in1,595 mm | 1,655 mm5 ft 5 in5 ft 5 in1,655 mm | −60 mm−2 in −3.6% |
| Wheelbase | 2,750 mm9 ft 0 in9 ft 0 in2,750 mm | 2,735 mm9 ft 0 in9 ft 0 in2,735 mm | +15 mm+0.6 in +0.5% |
| Footprint | 8.47 m²91.2 sq ft91.2 sq ft8.47 m² | 8.51 m²91.6 sq ft91.6 sq ft8.51 m² | −0.04 m²−0.4 sq ft −0.5% |
| Boot | 416 L14.7 cu ft14.7 cu ft416 L | 420 L14.8 cu ft14.8 cu ft420 L | −4 L−0.1 cu ft −1.0% |
| Kerb weight | Not in our catalog yet | 1,780–1,845 kg3,924–4,068 lb3,924–4,068 lb1,780–1,845 kg | - |
Width without mirrors. Figures come from the catalog version pages; the drawing uses the same numbers. Body outlines are generic for the body type - proportions are exact, styling is not. Weight difference compares the lightest versions.
Garage and parking
A typical single garage is about 5.5 × 3.0 m18 ft 1 in × 9 ft 10 in inside; a parking bay about 5.0 × 2.5 m16 ft 5 in × 8 ft 2 in. Room to open a door: about 600 mm2 ft each side.
C-HR+
- Single garage
- Tight 970 mm3 ft 2 in to spare in length, 565 mm1 ft 10 in each side
- Parking bay
- Tight 470 mm1 ft 7 in to spare in length, 315 mm1 ft 0 in each side
B10 I
- Single garage
- Tight 985 mm3 ft 3 in to spare in length, 558 mm1 ft 10 in each side
- Parking bay
- Tight 485 mm1 ft 7 in to spare in length, 308 mm1 ft 0 in each side
Frequently asked questions
Which is bigger, the Toyota C-HR+ or the Leapmotor B10 I?
The Leapmotor B10 I is the bigger car by footprint (length × width). The C-HR+ is 15 mm longer, 15 mm narrower and 60 mm lower than the B10 I. Its wheelbase is 15 mm longer.
Will the Toyota C-HR+ and the Leapmotor B10 I fit in a standard garage?
In a typical single garage of 5.5 × 3.0 m inside: The Toyota C-HR+ fits, but it is tight to get out (970 mm to spare in length, 565 mm each side). The Leapmotor B10 I fits, but it is tight to get out (985 mm to spare in length, 558 mm each side). Widths are without mirrors; check your own garage with our garage checker.
Which has the bigger boot?
Both boots hold about the same: 416 L in the Toyota C-HR+ and 420 L in the Leapmotor B10 I.
Drawn to one scale
Both cars use the same millimetre grid, so a longer bonnet or a taller roof shows exactly as it is.
Wheels at the real wheelbase
Dashed lines mark the axles. In Overlay both cars start at the front bumper; car 2 has a dashed outline.
Will it fit my garage?
Switch to Top view, or to feet and inches if your garage plan is in feet. Allow about 600 mm (2 ft) for opening the doors.

