Cupra Formentor KM 1.5 TSI Crossover
110 kW150 PS148 hp250 Nm2020
Read the full story of the Cupra Formentor KM
Updated Report an error

- Power
- 110 kW 150 PS · 148 hp
- Torque
- 250 Nm 184 lb-ft
- 0–100 km/h
- 9.0 s
- Fuel consumption
- 6.0 l/100 km
- Kerb weight
- 1,434 kg
- Boot volume
- 450 l
Built 2020, the Cupra Formentor KM 1.5 TSI crossover develops 110 kW (150 PS) and 250 Nm of torque from a 1.5-litre four-cylinder petrol engine. The Formentor KM 1.5 TSI pairs front-wheel drive with a six-speed manual gearbox.
This is the entry point among the 3 petrol versions of the Formentor KM; the range-topping 2.5 VZ5 TSI 4Drive (287 kW) has 161% more power. On top of that, it is the lightest (1,434 kg). The car needs 9.0 s to reach 100 km/h, reaches 205 km/h, averages 6.0 l/100 km and offers 104 PS per tonne.
Dimensions drawing
To scale · width without mirrors
Zoom in to read the measurements - or see the table below.
rulers in mminches, grid 500 mm1 ft Side view: dashed lines mark the axles
Engine
| Fuel | Petrol |
|---|---|
| Displacement | 1,498 cm³ 1.5 l · 91 cu in |
| Cylinders | 4 |
| Power | 110 kW 150 PS · 148 hp |
| Torque | 250 Nm 184 lb-ft |
Transmission
| Gearbox | Manual |
|---|---|
| Gears | 6 |
| Drive | Front-wheel drive |
Performance
| 0–100 km/h | 9.0 s 0–62 mph |
|---|---|
| Top speed | 205 km/h 127 mph |
| Fuel consumption | 6.0 l/100 km 47.1 mpg UK · 39.2 mpg US |
| CO₂ emissions | 136 g/km |
Dimensions and weight
| Length | 4,451 mm 175.2 in |
|---|---|
| Width | 1,839 mm 72.4 in |
| Height | 1,520 mm 59.8 in |
| Wheelbase | 2,679 mm 105.5 in |
| Kerb weight | 1,434 kg 3,161 lb |
| Boot volume | 450 l 15.9 cu ft |
| Fuel tank | 50 l 13.2 US gal |
Production
| Body type | Crossover |
|---|---|
| Years | 2020 |
| Generation | Formentor KM (2020–present) |
Compare size All Formentor KM versions All Cupra spec sheets
Data sources
Data checked by an editor against the sources below.
Data: 21 of 25 fields · 1 source · data changed 12 Nov 2026
- ADAC