Moskvich-412

Moskvich-412
  • Car model: Moskvich
  • Producing country: USSR
  • Year of issue: 1975
  • Body Type: Sedan

Moskvich-412 is a Soviet car produced at the Moscow plant of MZMA, later changed to AZLK. For the first time from the conveyor belt, Moskvich left in 1967 and was produced until 1977. For the basis of the 412th model, the engineers took the “younger brother” – Moskvich-408.

Big changes in appearance were not observed, it was just restyling 408th version. Technically, the novelty, has made a confident step, for its time. Its popularity, Moskvich acquired, taking part in the London-Sydney marathons, a length of 16 000 km and London-Mexico, a length of 26 000 km. The whole model range is Moskvich.

In the last of them, let it lie on the high mountain roads, the height of which reached up to 5,000 km. At such an altitude, it is known that there is very little oxygen, and therefore the engine could produce only about 20 out of 82 horsepower.

A serious test for the car. In the team event, in the first marathon, Moskvich took fourth place, and in London-Mexico – third. It served as a good advertisement of the car, and provided an opportunity to export the car abroad.

Exterior

Until 1969, the car was supplied with round headlights and a grille from its predecessor, but it had a new rear view, on which the lights were placed horizontally, and on top of them there was a triangular dimension. Subsequently, Moskvich-412 acquired new rectangular headlights produced in the GDR. All produced cars in the Moscow region, had chrome door handles, with a round button, to open them.

The car received an updated bodywork that met the safety requirements of those times and looked more modern. Later on the bumpers were equipped with fangs, which served as part of passive safety. After a while, the car underwent other changes and improvements.

Moskvich-412 1975

Interior

With the new update, the interior of the model was equipped with seat belts. Moreover, the car had a folding, telescopic steering column, and it, in turn, significantly reduced the impact of the accident. The panel cladding and front bodywork became softer.

Moskvich-412 interior

Unlike older Moskvich’s models, the gearshift lever was not under the steering wheel, but on the transmission tunnel. If to take in comparison salon VAZ 2101, it is a little bit already at 412th, than at the competitor. From the past models: The 401st and 407th, 412th differed by separate front seats.

Moskvich-412 photo salon

And now he could hold five passengers quite freely. The trunk had 350 liters and was on the same step as the luggage compartment of Liguli.

Specifications

Powertrain

Under the hood of Moskvich-412, there is a new engine UZAM. Its volume was 1.5 liters and developed 75 hp. The engine, block, valve cover and crankcase are made of aluminum. The peculiarity of the power unit was that the block of cylinders was tilted to the right in the course of movement.

Thanks to this, engineers have achieved a more compact engine and reduced the center of gravity of the car. The engine is synchronized with a four-stage manual transmission. There is an independent suspension at the front and a spring suspension at the back, which allows to transport loads. On the front and rear wheels, drum brakes equipped with a vacuum booster are installed.

Moskvich-412 Engine

The new power unit UZAM – 412 – was a real advantage of Moskvich. The fact that many of the details were made of aluminum, there were also their own disadvantages. For example, the crankcase, which was made of aluminum, became very vulnerable to penetration, on this basis, the installation of protection for the 412th Moskvich will be obviously not superfluous. The aluminum block was fitted with cast-iron sleeves, so this motor does not need to be wasted, it will be enough to replace the sleeves.

The unusual character of the engine UZAM – 412 should be attributed to the fact that it had a hemispherical form of combustion chamber and the fact that the inlet and outlet valves are in front of each other, and not next to each other, as in VAZakh.

This type of valve location makes it possible to improve the purging of the entire combustion chamber. The application of a similar scheme can be seen today on the engines of the American assembly of HEMI, which are installed on the machines of the company Chrysler.

It will not be superfluous to remind that the best car in Europe in 1967 is the FIAT 124, which developed capacity of 60 horsepower. The BMW 1500 engine reached a capacity of 75 horses, similar to the Moskvich engine, but the German’s torque was still higher – 118 against 108 N/M.

But a spoonful of tar is still present in the UZAM engine. Due to too long valve opening phase, the power unit is inclined to detonate. For example, VAZ 2101 opening phase is 232 degrees, and Moskvich – 282 degrees. It turns out that Zhiguli is a more injector than the Moscow car.

Photo drum brakes Moskvich-412

Based on passport data, the new Moskvich 412 reached the first hundred kilometers in 19 seconds, and its maximum speed was 142 km. Moskvich differs from VAZ also by installing drum brakes on the front wheels, while VAZ already had disc brakes. However, even in those days, the Moscow car was equipped with a vacuum booster brakes. With a speed of 100 km/h, 412th, to stop on dry asphalt 43.2 meters.

Moksvich 412 gearbox

Speaking of gearbox, it’s also inferior to Zhigulevskaya. As for the rear suspension, it has the same springs as the predecessor of the 408th, which facilitates the transportation of goods, but on the other hand, it causes overload, from which most Muscovites suffer.

The engine of the 412th Moskvich was delivered together with a 2-chamber carburetor and eight valve mechanism SOHS with a V-shaped valve arrangement. According to the passport, fuel consumption in the city was 10.3 liters per 100 km, and on the highway 7.4. The chassis with rear-wheel drive was used as the basis for the chassis, on which the body and the engine itself were built.

Engine

If you look at the power unit itself, you can see the modern for that year (1967) design: the camshaft, which was not already at the bottom, and at the top – it was driven by a chain of plate Morse with a tensioner-star. This scheme was followed by most of the world’s companies, such as Honda and others.

Before the arrival of the car brand VAZ-2108, our athletes chose just Moskvich, as the engines of the 1500 unit could be forced without much difficulty, and they had a good return on power. Finally, on the platform of the power unit UZAM-412, there were produced variations in serial version, the working volume of which was equal to 1.7, 1.8 and 2.0 liters. They were installed on the machine Moskvich 2141 “Svyatogor”, but did not gain wide popularity.

It is worth mentioning that it is with the help of the production carried out by MZMA that the upper camshafts were installed on the Zhiguli machines. The clutch was reinforced with the use of a diaphragm-type spring (an innovation in the field of automotive industry) and was produced under the license of a foreign company. The gearbox had an improved version of the one already produced. All shifts were synchronized.

Modifications

  • 412 – standard sedan;
  • 412I (until 1969) – produced in a special version that could comply with the European safety standard;
  • 412IE – all Moscow automobiles, the production of which originated in 1969, had IE liters, because the new body could first meet European safety standards and theoretically could be exported;
  • 412K – set of machines for production abroad;
  • 412M – car for medical services;
  • 412P – right-hand drive model, gearshift lever only for floor use;
  • 412T – model for taxi (popularization never bought);
  • 412U – training version with built-in additional pedals and color markup;
  • 412E – export variation;
  • 412Y – model for tropical areas;
  • 427 – is the basic version of the universal. Made since 1967th years. It had the same body as the 426th, but they were sold as engines. The 427th Moscow model had a unit from the 412th, and the 426th, from Moskvich – 408;
  • 434P – van version. Same as the 434th, but with the right steering wheel. The car was intended for states with left-hand traffic of cars. Moreover, some Moskvich 434P cars were introduced into the USSR Postal Service and used them to take letters out of the boxes. They also took them for forwarding in post offices;
  • 412P – models designed for sports purposes with engines that were forced and with a pair of carburetors Weber-40DCOe and “two-roll” cylinder heads. Their volume was 1.5, 1.6, 1.8 liters, and the power developed from 99 to 140 horsepower. The machines were designed by MZMA engineers to set all-Union speed records. The donor was just the 412th, from which only the bodywork was left in principle. Inside it lost the entire interior, but only the steering wheel and seat remained. He weighed an “empty” car about 980 kg. The 412P had its external plumage removed in order to reduce air resistance. The basic gas tank had 125 liters. Moreover, there were 13-inch rims made of magnesium.

Complections and prices

Purchase such a used car with a rarity of up to $1500, which is much cheaper than Zhiguli. It will be unreasonable to expect good quality from it, because it is already many years old.

Moskvich-412 rear view

Pluses and minuses

Pluses cars

  • Pleasant and stylish enough for your years;
  • Not a bad landing on the front seats;
  • All acceptable visibility;
  • For a moderate ride, satisfactory dynamics and speed;
  • Not bad passability;
  • Capacious luggage compartment;
  • Perfect and enduring qualities;
  • Incost parts and ease of replacement.

Cons of a car

  • Age;
  • Wheel brakes on all speakers;
  • Thusks to give too much free time to the machine;
  • Winter start-up difficulties of the power unit;
  • The narrow gauge, the car can easily flip over;
  • Fuel passageway;
  • Hard to find quality parts;
  • Soundy and always current gearbox;
  • Security;
  • Loud;
  • Tough suspension.

We sum up

At the time of graduation, Moskvich-412 was a pretty successful novelty. The advantages include a powerful engine, good cross-country ability, ease of maintenance and operation. Among the disadvantages are the underdeveloped gearbox, high fuel consumption, unattractive appearance and internal appearance.

Mokswich 412 car

We advise you to read the article: “History of the car “Moskvich” and enterprises AZLK

Mokswich 412 photo

Moskvich-412 drawing

Moskvich-412 drawing

Moskvich-412

Video overview

Similar news
Теги: ,

Error in the text? Select it with the mouse! And press: Ctrl + Enter

Subscribe to the newsletter:

Add a comment

Comments
SDA Online The catalogue of cars

Spelling error report

The following text will be sent to our editors: